Author Topic: Black screen when try to create Sun&Sky hdri  (Read 2605 times)

0 Members and 1 Guest are viewing this topic.

Offline dparcell87

  • Newbie
  • *
  • Posts: 17
Black screen when try to create Sun&Sky hdri
« on: November 20, 2014, 04:13:25 pm »
Hey guys not sure if anyone has run into this problem , but yeah I am trying to add a physical Sun and Sky in HDRI editor and when I click "generate HDRI" my whole screen turns black and I can not figure out what I did to cause this to happen.  Anyone out there has any ideas please help! THanks

Offline dparcell87

  • Newbie
  • *
  • Posts: 17
Re: Black screen when try to create Sun&Sky hdri
« Reply #1 on: November 20, 2014, 05:37:22 pm »
also How would I go about adding a light to simulate sunlight? again any help or resources would be greatly appreciated. Thanks

Offline TpwUK

  • KeyShot Beta
  • Hero Member
  • *****
  • Posts: 2910
Re: Black screen when try to create Sun&Sky hdri
« Reply #2 on: November 20, 2014, 11:09:36 pm »
Hi dparcell87 - Your question is a little too ambiguous.

You say your whole screen goes black, do you mean the whole screen, just Keyshot's live renderer or the little screen used to generate the Sun & Sky map ?

Which OS are you using - Windows or OS X ?

Your processor is AMD or Intel ?

Please make things easier for us to offer any help

Martin

Offline dparcell87

  • Newbie
  • *
  • Posts: 17
Re: Black screen when try to create Sun&Sky hdri
« Reply #3 on: November 21, 2014, 02:05:31 pm »
just the live renderer. I think I imported a model two big or something as soon as I imported my screen went black. Must have zoomed way out or something? How do I fix this.     Oh I am using windows 7.

Offline TpwUK

  • KeyShot Beta
  • Hero Member
  • *****
  • Posts: 2910
Re: Black screen when try to create Sun&Sky hdri
« Reply #4 on: November 21, 2014, 02:33:19 pm »
Right - I think i understand what you have done ... When importing OBJ or other polygon mesh objects try this as it is very unlikely you have model too big for Keyshot

location = center geometry and snap to ground
Size = Automatic
Up Orientation = Y
Environment & Camera = Tick both options

If you are importing NURBS geometry then change Up Orientation to Z and Import NURBS data

Martin

Offline dparcell87

  • Newbie
  • *
  • Posts: 17
Re: Black screen when try to create Sun&Sky hdri
« Reply #5 on: November 23, 2014, 08:23:29 pm »
That did the trick! Thanks man