Author Topic: Help! Trouble applying label  (Read 1998 times)

0 Members and 1 Guest are viewing this topic.

Offline Will Gibbons

  • Hero Member
  • *****
  • Posts: 2852
  • willgibbons.com
    • My Website
Help! Trouble applying label
« on: September 16, 2014, 11:47:12 am »
Thanks for looking and thanks for any help in advance. I'm trying to apply a label to a clear acrylic/glass object in Keyshot. In the attached photo, the label is placed on the TOP or Y-up surface. I need to place it on the other side of that piece of acrylic/glass.

I've tried placing it on other geometry, but when layering clear/transparent materials, I get undesired results. Any help would be greatly appreciated!

Thanks,

Offline TpwUK

  • KeyShot Beta
  • Hero Member
  • *****
  • Posts: 2910
Re: Help! Trouble applying label
« Reply #1 on: September 16, 2014, 03:33:05 pm »
Don't know if this will work as i have never tried it, but flip the label and place where wanted, then rotate the part 180 degrees ?

Martin

Offline Will Gibbons

  • Hero Member
  • *****
  • Posts: 2852
  • willgibbons.com
    • My Website
Re: Help! Trouble applying label
« Reply #2 on: September 16, 2014, 04:27:21 pm »
Thanks for the suggestion, @tpwUK. I did try that earlier... it may be worth trying again, but the first time, it still didn't seem to solve the problem.