Author Topic: Lighting shifts after saving/generating HQ HDRI in HDR Editor  (Read 2106 times)

0 Members and 1 Guest are viewing this topic.

Offline DriesV

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2412
  • Product Specialist at Luxion
I notice that the lighting, that I set up in the HDR Editor using pin lights, shifts after saving or generating a HQ preview HDRI. Somebow the environment gets transformed, as highlights and reflection patterns that were on the model while working in the HDR Editor are shifted/gone after saving. All pins are still in the same position when I edit the HDRI again, but I have to move the pins around to get the same reflection patterns. Saving, again shifts the lighting...

It is quite frustrating to see your lighting get out of whack, when you spent 15/30 minutes meticulously placing pins and tweaking their parameters.

I'm on KS 4.0.74.

Dries
« Last Edit: April 12, 2013, 11:24:38 am by DriesV »

guest84672

  • Guest
Re: Lighting shifts after saving/generating HQ HDRI in HDR Editor
« Reply #1 on: April 14, 2013, 08:56:45 am »
We will look into this. In the future, please report these issues to [email protected] Thanks.

Offline SLC_Yogurt

  • Newbie
  • *
  • Posts: 1
Re: Lighting shifts after saving/generating HQ HDRI in HDR Editor
« Reply #2 on: June 14, 2013, 10:02:39 am »
I also have the same issue. Same build too... 4.0.74.

Any updates?