Author Topic: IGES import problems  (Read 5242 times)

0 Members and 1 Guest are viewing this topic.

Offline quigley

  • Full Member
  • ***
  • Posts: 204
IGES import problems
« on: July 17, 2010, 10:50:36 am »
I have been sent a pile of IGES files that refuse to import into KeyShot 2 using the default "beta" importers. When I turn this option off the files import OK. Would it help to have them?

Also I have been trying unsuccessfully to import 3D PDF into Keyshot 2. For these files I opened the IGES in Acrobat 3D Review (comes with 9 Extended), imported them (all OK BTW), and exported to 3D PDF (all open in Acrobat OK). I tried to import these into Keyshot but no go. I have not actually managed to get any PDF itno Keyshot yet that originated in 3D Review. Again, do you want some of these?

guest84672

  • Guest
Re: IGES import problems
« Reply #1 on: July 19, 2010, 07:52:40 am »
IGES - yes please!!! Send to me directly. 3DPDF is not supported yet.

Thanks,
Thomas

Offline quigley

  • Full Member
  • ***
  • Posts: 204
Re: IGES import problems
« Reply #2 on: July 19, 2010, 12:18:22 pm »
OK will do. Some are pretty big so I'll load them to my site.

guest84672

  • Guest
Re: IGES import problems
« Reply #3 on: July 20, 2010, 06:39:36 am »
Ok - we've also noticed some issues with the latest installer that since have been corrected. Please make sure you download and install again just to make sure that there is a real problem.

Thanks,
Thomas

Offline tamm0rine

  • Newbie
  • *
  • Posts: 2
Re: IGES import problems
« Reply #4 on: July 20, 2010, 12:51:27 pm »
Same here... cannot import IGES files exported by Autodesk Alias 2010 into KeyShot 2.0.46 with the beta importer. Tessellation is set to the default value. I sent you an e-mail with a link to the file.

With version 2.0.38 import was possible, however neither layers nor groups I defined in Alias were respected.

The old importer works fine.

Btw, the preference dialog doesn't remember the state of the beta importer checkbox across application restarts.