Author Topic: Out of memory (requesting 41 bytes)!!! This may cause instabilities...  (Read 12760 times)

0 Members and 1 Guest are viewing this topic.

Offline Philrider7

  • Newbie
  • *
  • Posts: 48
Hi, I am importing a 1.2 gb Rhino file into Keyshot, but during the loading I get this message of an error: Out of memory (requesting 41 bytes)!!! This may cause instabilities...

I've watched my memory in the task manager and with 9 gb of memory installed, this crash at 4 gb of memory used. So I dunno what's happening?

Thanks

Phil

Offline PhilippeV8

  • Hero Member
  • *****
  • Posts: 1914
    • PV8-Portfolio
I have a couple of gb ram, but can only use 1 due to Windows XP.
Not because you have 9, your OS will let you use up all 9 for a single aplication.

guest84672

  • Guest
I think this is addressed in 4.1.

Offline Philrider7

  • Newbie
  • *
  • Posts: 48
Will update to 4.1 one day when it's up and see if set things right! Thanks Thomas.
« Last Edit: May 31, 2013, 07:10:43 am by Philrider7 »

Offline William.oliveira

  • Newbie
  • *
  • Posts: 3
Hi, Thomas!

Same problem appears here when I import some models: "Out of memory (requesting 41 bytes)!!! This may cause instabilities"

I already made the update and it was not resolved. My workstation have 8Gb ram and Windows 7.

How to proceed?

Thanks

guest84672

  • Guest
32bit or 64bit? And how big is your model?

Offline William.oliveira

  • Newbie
  • *
  • Posts: 3
64bit.

File: 50mb. Maybe the model is too heavy...?

Offline William.oliveira

  • Newbie
  • *
  • Posts: 3
I deleted some details of the model and the size down to 15mb. Now, it works.

Thanks!