Author Topic: Can we fix the solidworks import translation please  (Read 5485 times)

0 Members and 1 Guest are viewing this topic.

Offline quigley

Can we fix the solidworks import translation please
« on: July 13, 2010, 03:52:05 pm »
When SW parts come in, they come in rotated 90 degrees (z up). Can this be fixed ASAP? Driving me nuts at the moment!

Offline David

Re: Can we fix the solidworks import translation please
« Reply #1 on: July 14, 2010, 12:52:32 am »
+1

Offline Robert V.

Re: Can we fix the solidworks import translation please
« Reply #2 on: July 14, 2010, 01:24:29 am »
+1

guest84672

  • Guest
Re: Can we fix the solidworks import translation please
« Reply #3 on: July 14, 2010, 07:25:22 am »
Will be fixed in the next update.

Offline Speedster

Re: Can we fix the solidworks import translation please
« Reply #4 on: July 14, 2010, 02:35:42 pm »
Thomas mentioned to me that the SolidWorks issues are almost finished, so I'm patient.  "Patience has its perfect work" as was once said.

Just for grins, I imported three SolidWorks parts from the same model.  Here's how they imported.  All I did was rotate each to vertical.  The hood is about 18" high, as is the grill shell.  The tire is 30 inches in diameter.  I set the focal length to 100 just to minimize perspective issues.

I can understand different apps opening at different scales, but these are all from the same model. 

All in all, I'm fast becoming a big fan of KS2!

Bill G

Offline jmfit

Re: Can we fix the solidworks import translation please
« Reply #5 on: July 17, 2010, 06:19:54 pm »
Thomas-
I just updated to 2.0.6 and imported assemblies still are rotated 90 degrees.

thanks--

joe