Author Topic: Glass Help  (Read 3745 times)

0 Members and 1 Guest are viewing this topic.

Offline AWHeathcote

  • Newbie
  • *
  • Posts: 15
Glass Help
« on: February 14, 2013, 02:52:47 pm »
Hello all,
New here.
I have been experimenting with KeyShot and I am having problems with glass.

As can be seen in the attachment, I have designed a Gameboy but the screen which i have set to glass is looking funky.
I've been playing with it for 5 hours now and I cant figure it out.
Would anyone be able to give any advice on something i may be doing wrong as I'm fairly new to KeyShot.

Also any other advice on the rendering would be great.

Thanks

Offline DriesV

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2412
  • Product Specialist at Luxion
Re: Glass Help
« Reply #1 on: February 14, 2013, 03:03:49 pm »
Seems like the back face of the glass cover is touching the part behind it.
Try moving the cover away from that part, so that they don't intersect anymore (very small translation distance to the front will suffice).

Dries
« Last Edit: February 14, 2013, 03:06:52 pm by DriesV »

Offline AWHeathcote

  • Newbie
  • *
  • Posts: 15
Re: Glass Help
« Reply #2 on: February 14, 2013, 03:11:47 pm »
That's much better!
Thank you very much

Offline PhilippeV8

  • Hero Member
  • *****
  • Posts: 1914
    • PV8-Portfolio
Re: Glass Help
« Reply #3 on: February 14, 2013, 11:16:23 pm »
This is something that just does keep bumping up every few months  ;D
I've been there 2  ;)

ref. 2 the glass touching faces issue  :D
« Last Edit: February 15, 2013, 02:06:36 am by PhilippeV8 »

Offline AWHeathcote

  • Newbie
  • *
  • Posts: 15
Re: Glass Help
« Reply #4 on: February 15, 2013, 12:12:16 am »
Yea ive seen quite a few and thought id give it a go.
Im actually using it for university project as well so good practice for using KeyShot :)