Author Topic: Bad tesselation after importing Inventor files  (Read 4554 times)

0 Members and 1 Guest are viewing this topic.

Offline jtreeder

  • Newbie
  • *
  • Posts: 3
Bad tesselation after importing Inventor files
« on: January 29, 2013, 11:58:13 am »
I have the tessellation quality set to max (1) on the import dialogue, but some features of my model have poor tesselation and look bad. Here is what I'm getting (I am talking about the holes, they should be circles):



Here are the Inventor files for the model on the left:
« Last Edit: January 29, 2013, 12:00:07 pm by jtreeder »

Offline KeyShot

  • Administrator
  • Hero Member
  • *****
  • Posts: 1126
Re: Bad tesselation after importing Inventor files
« Reply #1 on: January 29, 2013, 10:45:11 pm »
Thanks. We will look into this.

Offline jtreeder

  • Newbie
  • *
  • Posts: 3
Re: Bad tesselation after importing Inventor files
« Reply #2 on: January 30, 2013, 08:16:17 am »
Thanks. If it matters, I'm using Inventor 2013 and Keyshot 3.3.33.

Offline jtreeder

  • Newbie
  • *
  • Posts: 3
Re: Bad tesselation after importing Inventor files
« Reply #3 on: April 16, 2013, 01:16:26 pm »
I am still having this problem, and I've determined that it is not with my CAD software.

I've tried it with Inventor and ProENGINEER, and I get the same results shown above.

Any advice?