Author Topic: Tha Hand  (Read 3352 times)

0 Members and 1 Guest are viewing this topic.

Offline patokali

  • Sr. Member
  • ****
  • Posts: 414
Tha Hand
« on: June 26, 2012, 12:27:29 pm »
Print proyect the Hand

www.patokali.com

Offline Josh3D

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3077
    • keyshot.com
Re: Tha Hand
« Reply #1 on: June 28, 2012, 08:01:44 am »
very interesting. can you tell us more about the project?

Offline Dylan

  • Sr. Member
  • ****
  • Posts: 421
Re: Tha Hand
« Reply #2 on: June 28, 2012, 08:53:12 am »
Nice work and convincingly set into the environment image. What's the story that goes with it?

Offline patokali

  • Sr. Member
  • ****
  • Posts: 414
Re: Tha Hand
« Reply #3 on: June 28, 2012, 12:50:14 pm »
Well, is not my project, is from a client, he is doing something for the "discapacity people" or something like that, in this case when somebody lost a finger...and maybe they can replaced for this new "gadgets fingers" Is something interesting.

The 3D prints are 25 cms

Thank you very much for your comments.

Sorry for my English, Greetings.


very interesting. can you tell us more about the project?
« Last Edit: June 28, 2012, 12:52:35 pm by patokali »

Offline patokali

  • Sr. Member
  • ****
  • Posts: 414
Re: Tha Hand
« Reply #4 on: June 28, 2012, 12:50:41 pm »
Well, is not my project, is from a client, he is doing something for the "discapacity people" or something like that, in this case when somebody lost a finger...and maybe they can replaced for this new "gadgets fingers" Is something interesting.

The 3D prints are 25 cms

Thank you very much for your comments.

Sorry for my English, Greetings.


Nice work and convincingly set into the environment image. What's the story that goes with it?
« Last Edit: June 28, 2012, 12:52:47 pm by patokali »

Offline youknowwho4eva

  • Jr. Member
  • **
  • Posts: 98
Re: Tha Hand
« Reply #5 on: June 28, 2012, 12:55:31 pm »
3D printed goodness! Who did you use for that? Or if you did them yourself, what printer/material?

Offline patokali

  • Sr. Member
  • ****
  • Posts: 414
Re: Tha Hand
« Reply #6 on: June 29, 2012, 05:13:53 am »
Well, is not my project, is from a client, he is doing something for the "discapacity people" or something like that, in this case when somebody lost a finger...and maybe they can replaced for this new "gadgets fingers" Is something interesting.

I dont know what material is, but i think is something like plastic.

Thank you very much for your comments.

3D printed goodness! Who did you use for that? Or if you did them yourself, what printer/material?

Offline Dylan

  • Sr. Member
  • ****
  • Posts: 421
Re: Tha Hand
« Reply #7 on: June 29, 2012, 12:39:22 pm »
3D printed goodness! Who did you use for that? Or if you did them yourself, what printer/material?

I didn't realize it was 3D printed until now.

Offline patokali

  • Sr. Member
  • ****
  • Posts: 414
Re: Tha Hand
« Reply #8 on: June 29, 2012, 04:06:50 pm »
Yep! is 3D print...thanks for comment.

3D printed goodness! Who did you use for that? Or if you did them yourself, what printer/material?

I didn't realize it was 3D printed until now.