Author Topic: Ortho Camera Dolly and Postition  (Read 4603 times)

0 Members and 1 Guest are viewing this topic.

Offline m2tts

  • Full Member
  • ***
  • Posts: 211
Ortho Camera Dolly and Postition
« on: March 10, 2012, 02:07:24 pm »
I have a camera view saved that is orthographic used to capture a three view drawing of concepts for a presentation to our client. Today I altered one of the concepts and imported it into the scene. When I went to my saved orthographic view, the dolly and pan positions of the camera view were completely off from what was saved yesterday. I can't say if the numbers in the dialog boxes for camera position were the same or not as I did not take note of those yesterday. During yesterday's session this camera view was remembered as I went back and forth to it many times. It was only after I closed KeyShot and opened the scene today that the saved view was askew.

guest84672

  • Guest
Re: Ortho Camera Dolly and Postition
« Reply #1 on: March 12, 2012, 06:48:32 am »
The scale of the object was correct though?

Offline m2tts

  • Full Member
  • ***
  • Posts: 211
Re: Ortho Camera Dolly and Postition
« Reply #2 on: March 12, 2012, 07:51:15 am »
Yes Thomas. This time the scale was the same as the previous import.

guest84672

  • Guest
Re: Ortho Camera Dolly and Postition
« Reply #3 on: March 12, 2012, 07:58:41 am »
Can you share the scene?