Author Topic: Vinyl Hose Material  (Read 1391 times)

0 Members and 1 Guest are viewing this topic.

Offline eggieweg

  • Newbie
  • *
  • Posts: 7
Vinyl Hose Material
« on: July 11, 2019, 08:58:07 am »
Trying to build a vinyl hose material but coming up short. Attached is an example of what i'm trying to achieve. Any help would be greatly appreciated. thank you.

Offline NM-92

  • KeyShot Beta
  • Hero Member
  • *****
  • Posts: 1167
    • Behance
Re: Vinyl Hose Material
« Reply #1 on: July 11, 2019, 03:01:57 pm »
Hi. If your model has UV maps, you are pretty much done. I think you should have your hose separate into two pieces. The vynil clear coat, and the inside that should have the squared pattern as a bump and/or roughness. The outer vynil should have something like clear plastic and that will give you the reflexions.

Offline nicordf

  • Full Member
  • ***
  • Posts: 148
  • Stuff Designer
    • Instagram
Re: Vinyl Hose Material
« Reply #2 on: July 12, 2019, 02:48:43 pm »
Hi! If it doesn't have UV maps, and your have modelled it in rhino or some CAD software, Rhino has a pretty rough but usefull UV unwrapping node; If you think it could be useful let me know and I can upload a screengrab/quick tutorial

Offline MWo

  • Hero Member
  • *****
  • Posts: 898
  • Senior Technical Consultant @ INNEO (Germany)
    • german KeyShot page from INNEO Solutions
Re: Vinyl Hose Material
« Reply #3 on: July 13, 2019, 09:00:30 am »
maybe this two solutions (KeyShot 8 scene) will guide you in the right directions?


Hope that helps
Cheers
Marco

Offline eggieweg

  • Newbie
  • *
  • Posts: 7
Re: Vinyl Hose Material
« Reply #4 on: July 15, 2019, 12:39:01 pm »
For anybody interested, here's the final result. thanks for all the suggestions.

Offline MWo

  • Hero Member
  • *****
  • Posts: 898
  • Senior Technical Consultant @ INNEO (Germany)
    • german KeyShot page from INNEO Solutions
Re: Vinyl Hose Material
« Reply #5 on: July 15, 2019, 01:14:28 pm »
thumbs up!

Offline NM-92

  • KeyShot Beta
  • Hero Member
  • *****
  • Posts: 1167
    • Behance
Re: Vinyl Hose Material
« Reply #6 on: July 21, 2019, 06:29:42 pm »
Great results ! Can you tell us wich technique have you applied ?

Offline MWo

  • Hero Member
  • *****
  • Posts: 898
  • Senior Technical Consultant @ INNEO (Germany)
    • german KeyShot page from INNEO Solutions
Re: Vinyl Hose Material
« Reply #7 on: July 22, 2019, 04:21:02 am »
Hey Niko.

It looks like a weave procedural followed kind of a UV map (similar to my uploaded scene).


Cheers
Marco