Author Topic: Cutaway Fix  (Read 135 times)

0 Members and 1 Guest are viewing this topic.

Offline FIT

  • Newbie
  • *
  • Posts: 1
Cutaway Fix
« on: June 20, 2019, 03:11:37 am »
Hi Guys,

We had an issue (that later we found it is a known issue) with the material eliminated by the cutaway still affecting the surface near and "in" it.

After loosing our hair we found a quick fix - just add a color fade animation to the material you are cutting and link it to the transparency node. No need to go from white to black and effect the material, a very minor change to grey will do the trick.