Author Topic: Dragon  (Read 2472 times)

0 Members and 1 Guest are viewing this topic.

Offline Jet3D

  • Newbie
  • *
  • Posts: 30
  • Jet Cooper
    • Jet Cooper 3D
Re: Dragon
« Reply #15 on: May 28, 2019, 12:15:31 pm »
As soon as Marvel stop hogging the machines, I will pop this on and upload pics.

Regards, Jet

Offline nachoriesco

  • Sr. Member
  • ****
  • Posts: 307
  • Freelance Digital Sculptor
    • Nacho Riesco Organic Jewelry Designs
Re: Dragon
« Reply #16 on: June 08, 2019, 03:08:33 am »
Hi all! Here goes some pictures of the printing process, masterfully made by Jet3d. I love how it came out!














Offline Jet3D

  • Newbie
  • *
  • Posts: 30
  • Jet Cooper
    • Jet Cooper 3D
Re: Dragon
« Reply #17 on: June 12, 2019, 04:18:08 am »
On its way.....

Online Eric Summers

  • Sr. Member
  • ****
  • Posts: 364
  • CAD Specialist II, Water Pik, Inc.
    • WaterPik Home
Re: Dragon
« Reply #18 on: June 12, 2019, 06:38:05 am »
That's pretty sweet looking! Jet, out of curiosity, what is the block at the far end of the build plate? Is it a purge part?

Offline Jet3D

  • Newbie
  • *
  • Posts: 30
  • Jet Cooper
    • Jet Cooper 3D
Re: Dragon
« Reply #19 on: June 12, 2019, 06:58:50 am »
Hi Eric  8 )

This is a registration wall which is used to check fails and clogged heads that may be concealed by the print.

The machines are the MJP 2500 PLUS by 3Dsystems.

Online Eric Summers

  • Sr. Member
  • ****
  • Posts: 364
  • CAD Specialist II, Water Pik, Inc.
    • WaterPik Home
Re: Dragon
« Reply #20 on: June 12, 2019, 09:03:30 am »
Hi Eric  8 )

This is a registration wall which is used to check fails and clogged heads that may be concealed by the print.

The machines are the MJP 2500 PLUS by 3Dsystems.

Very cool! Thanks for the info; ProJets are pretty great.