Author Topic: Dragon  (Read 2782 times)

0 Members and 1 Guest are viewing this topic.

Offline nachoriesco

  • Sr. Member
  • ****
  • Posts: 309
  • Freelance Digital Sculptor
    • Nacho Riesco Organic Jewelry Designs
Dragon
« on: May 15, 2019, 07:11:15 am »
Hi all! This is an sculpt I wanted to make some time ago, it’s based on an old unfinished pencil sketch and now has been converted it into a 3D model, hope you like it.
On the following link you can watch more images: https://www.artstation.com/artwork/W2rW22













Offline abeer

  • Newbie
  • *
  • Posts: 8
Re: Dragon
« Reply #1 on: May 15, 2019, 02:55:36 pm »
I dig his expression :D Nice sculpt.

Offline DMerz III

  • KeyShot Beta
  • Hero Member
  • *****
  • Posts: 825
  • David Merz the Third
    • MerzTheThird
Re: Dragon
« Reply #2 on: May 15, 2019, 05:57:16 pm »
Very cool! I like the sculpt and especially like the final beauty shot

Offline nachoriesco

  • Sr. Member
  • ****
  • Posts: 309
  • Freelance Digital Sculptor
    • Nacho Riesco Organic Jewelry Designs
Re: Dragon
« Reply #3 on: May 17, 2019, 12:41:58 pm »
DMerz III, thank you!  ;)
Here goes another shot


Offline Eric Summers

  • Sr. Member
  • ****
  • Posts: 368
  • CAD Specialist II, Water Pik, Inc.
    • WaterPik Home
Re: Dragon
« Reply #4 on: May 17, 2019, 01:03:30 pm »
Oh man, that's pretty sweet! I definitely liked the others, but the material on this one is amazing! The level of detail is impressive. :)

Offline Will Gibbons

  • Hero Member
  • *****
  • Posts: 2852
  • willgibbons.com
    • My Website
Re: Dragon
« Reply #5 on: May 17, 2019, 01:23:15 pm »
Wow! This is beautiful! And that translucent material is great! I love it.

Offline nachoriesco

  • Sr. Member
  • ****
  • Posts: 309
  • Freelance Digital Sculptor
    • Nacho Riesco Organic Jewelry Designs
Re: Dragon
« Reply #6 on: May 18, 2019, 12:13:53 pm »
Thank you guys!  :D ;) Yes translucency always gives an special touch

Offline Jet3D

  • Newbie
  • *
  • Posts: 33
  • Jet Cooper
    • Jet Cooper 3D
Re: Dragon
« Reply #7 on: May 24, 2019, 07:12:39 am »
This is a fantastic piece of art. Love it.
When you are ready I can print it for you on our dental /  jewellery printers if you wish?
MJP 2500 - as a gift....

Regards, Jet

Offline nachoriesco

  • Sr. Member
  • ****
  • Posts: 309
  • Freelance Digital Sculptor
    • Nacho Riesco Organic Jewelry Designs
Re: Dragon
« Reply #8 on: May 24, 2019, 07:43:30 am »
Tanks Jet3d, do you think that it'd be the right model for that printer? do you mean in wax?

Offline Jet3D

  • Newbie
  • *
  • Posts: 33
  • Jet Cooper
    • Jet Cooper 3D
Re: Dragon
« Reply #9 on: May 24, 2019, 10:40:10 am »
Hi mate,

The printer can print the most amazing detail and uses wax as support that melts away leaving the print.
The printer is a pro one that is around 60 k.

The advantage is the is no surface finishing / sanding and parts like your feathers / scales will all come out.
You can also have spaces like up under helmets etc. The wax provides 100% support so there is no warping of the print and accuracy is brilliant.

Examples I printed below.

Regards, Jet

Offline nachoriesco

  • Sr. Member
  • ****
  • Posts: 309
  • Freelance Digital Sculptor
    • Nacho Riesco Organic Jewelry Designs
Re: Dragon
« Reply #10 on: May 24, 2019, 10:59:14 am »
 I know that machine perfectly, I've printed several designs with it, but all of them about jewelry products so , they were printed on wax ( blue one). But yours is the one which prints with resin ,right? I know that uses wax for supports.

If so, I would love to print it out!

Offline Jet3D

  • Newbie
  • *
  • Posts: 33
  • Jet Cooper
    • Jet Cooper 3D
Re: Dragon
« Reply #11 on: May 24, 2019, 11:04:46 am »
I run the 3D department of Gentle Giant at Pinewood Studios in the UK.
Yes, ours are all of the resin ones - they are the same except for the software.
I have used the MJP 2500W for casting a hand and half sword hilt..... superb.

I am happy to print this for you and freight if you wish, when you are ready.
Would be my pleasure mate.

Jet

Offline nachoriesco

  • Sr. Member
  • ****
  • Posts: 309
  • Freelance Digital Sculptor
    • Nacho Riesco Organic Jewelry Designs
Re: Dragon
« Reply #12 on: May 24, 2019, 11:13:18 am »
Sure! Count on it! I've been thinking many times to contact with your company ,to apply as digital sculptor!  ;D

Could you give an email where we can arrange all details?

And thanks a lot for your offering!

Offline Jet3D

  • Newbie
  • *
  • Posts: 33
  • Jet Cooper
    • Jet Cooper 3D
Re: Dragon
« Reply #13 on: May 24, 2019, 11:16:26 am »
Sure mate.
My personal email is [email protected]

Anytime - you are a great artist

Offline Will Gibbons

  • Hero Member
  • *****
  • Posts: 2852
  • willgibbons.com
    • My Website
Re: Dragon
« Reply #14 on: May 28, 2019, 11:49:22 am »
Would be cool to see the rendering next to a final print!