Author Topic: Black stained/dyed wood  (Read 298 times)

0 Members and 1 Guest are viewing this topic.

Offline proddescn

  • Newbie
  • *
  • Posts: 2
Black stained/dyed wood
« on: April 19, 2019, 05:49:30 am »
Hi everyone,

I'm just in the process of rendering a piece of furniture with a black dyed ash finish like in the attachments. I'm struggling to get the grain to look right however. Any tips or advice anyone can give to acheive this would be massively appreciated.
« Last Edit: April 25, 2019, 07:08:49 am by proddescn »

Offline Danthedesigner

  • Newbie
  • *
  • Posts: 25
Re: Black stained/dyed wood
« Reply #1 on: April 30, 2019, 05:09:14 pm »
I would try using this attached texture for the diffuse, specular and bump.

Online RRIS

  • Full Member
  • ***
  • Posts: 226
  • Renze Rispens - industrial designer
Re: Black stained/dyed wood
« Reply #2 on: May 01, 2019, 01:03:45 am »
I'd start with any normal wood material, put a utility node between the map and the material (color adjust for example, to desaturate the map) and check the Blend with Color box (and just pick a dark gray).
From there on it should be relatively close to what you need?

Offline proddescn

  • Newbie
  • *
  • Posts: 2
Re: Black stained/dyed wood
« Reply #3 on: May 01, 2019, 07:03:50 am »
Thank you both! Got the material sorted now, just need to get the lighting right.