Author Topic: Cutaway shadow issue  (Read 94 times)

0 Members and 1 Guest are viewing this topic.

Offline djnoone

  • Newbie
  • *
  • Posts: 10
Cutaway shadow issue
« on: January 09, 2019, 12:56:53 am »
On the screenshot the gray box is cutaway - inherit caps.
No hard lights are added, and even with no lights there is a hard shadow on the edge/groove cuted into the wood part.
The shadow is too intense on the edge.
In Cutaway - no caps the shadow is OK but i loose the texture inside the groove.
Is this a bug, or something is to be adjusted?


Online DriesV

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2380
  • Product Specialist at Luxion
Re: Cutaway shadow issue
« Reply #1 on: January 09, 2019, 04:22:14 am »
Hi,

When two objects are intersecting (in your example: the wooden block and the calendar card), there can be artifacts if you are applying a cutaway.
Unfortunately there is no fix other than actually modeling the groove.

Dries

Offline djnoone

  • Newbie
  • *
  • Posts: 10
Re: Cutaway shadow issue
« Reply #2 on: January 11, 2019, 05:03:23 am »
Just to put some additional info for the subject - the bugs are interesting: