Author Topic: displacement creates gaps at geometry edges  (Read 1111 times)

0 Members and 1 Guest are viewing this topic.

Offline PerFotoVDB

  • Jr. Member
  • **
  • Posts: 54
displacement creates gaps at geometry edges
« on: December 12, 2018, 06:59:13 am »
Hi All

After viewing the webinar on displacement we started testing out this new function.

We added a box from the keyshot geometry menu and put a granite displacement on it.
The displacement looks nice apart from the polys that seem to get ripped apart and don't retain there connection to each other.

Is this a feature or a bug?

Cheers
Per

Offline Eric Summers

  • Sr. Member
  • ****
  • Posts: 364
  • CAD Specialist II, Water Pik, Inc.
    • WaterPik Home
Re: displacement creates gaps at geometry edges
« Reply #1 on: December 12, 2018, 07:22:10 am »
Hey Per,

It is a known issue. Check this page out:

https://luxion.atlassian.net/wiki/spaces/K8M/pages/431849563/Limitations+Known+Issues

I thought I had seen something on the forum about it too, but I don't remember where.

Offline PerFotoVDB

  • Jr. Member
  • **
  • Posts: 54
Re: displacement creates gaps at geometry edges
« Reply #2 on: December 13, 2018, 04:43:41 am »
Thanks Eric

That does the trick.

Thanks a lot!

It's a bit in fortunate though. All this extra CAD work :(
Would be great if the displacement would work with the round edges :)
For me this crashes keyshot.

Cheers
Per