Share > Materials and Textures

"milky foil"

(1/1)

monsieurlacombe:
Hey,
Is there a way to create such a "milky foil" as shown in the attached picture? Im grateful for your help.
Greetings.

bdesign:
I'd recommend using the Plastic (Cloudy) material type, and make sure your sheet has some actual thickness (volume).

Cheers,
Eric

MWo:
I would start with the advanced material, black as diffuse and light grey in the transmission channels with a small roughness value on top and a high roughness in the transmission.


That should work fine and way faster then cloudy plastic (sorry Eric).


May share your test results and scene?!


Hope that helps


Cheers
Marco

Navigation

[0] Message Index

Go to full version