Author Topic: Depth of labels  (Read 2526 times)

0 Members and 2 Guests are viewing this topic.

Offline Philrider7

  • Newbie
  • *
  • Posts: 48
Depth of labels
« on: June 16, 2011, 10:05:32 am »
I am showing you part of a project that has glass with a silkscreen on it. I got the glass with a thickness (solid and in the option, I checked 2 sides and I put the silkscreen as a label in png. I tried to project it with normal projection, but it wasnt doing it and after that I went it planar z and its showing the labels on the other sides of the glass too!

I understannd than depth controls the surfaces that sees this labels, but depth is gray out on planar z!

Is there something i didnt follow correctly or any better solution?

Thanks

Phil

guest84672

  • Guest
Re: Depth of labels
« Reply #1 on: June 16, 2011, 11:32:24 am »
What do you mean by "normal didn't do it"? Click on position and move the label into place once you applied it.

Thomas