Author Topic: Polished Finish  (Read 2208 times)

0 Members and 1 Guest are viewing this topic.

Offline Adam_04

  • Newbie
  • *
  • Posts: 5
Polished Finish
« on: November 08, 2017, 01:41:07 am »
Hi,

I am relatively new to keyshot and was wondering if anyone can help me.

I have started creating my own materials but I mainly used polished metal materials and was wondering if anyone can help me with making them look more realistic. What I have noticed is that when using a polished material on keyshot its always a perfect mirror finish but in real life it almost never looks like this. There is usually 'waves' in the polishing from it being polished on a mop and there for 9 times out of 10 a perfect mirror finish is not achievable.

I have attached an image from Google of the type of 'waved' polishing I mean. Obviously, I'm not looking for something as drastic as this and also still want a clean polish, but just a hint of wave to the polish so it doesn't look like a flat mirror.

So far I have tried using the curvature tool which works well on heavily stepped objects but other than this if I use curvature too much it ruins the corners.

If anyone could help or point me in the right direction I'd really appreciate it!

Thanks in advance

Adam

Offline DriesV

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2432
  • Product Specialist at Luxion
Re: Polished Finish
« Reply #1 on: November 08, 2017, 04:16:19 am »
Hi Adam,

I would try to use a large (relative to your model) Noise texture as Bump, with a fairly low Bump Height.
You can get some interesting imperfections if you also add a Roughness texture.

Attached is an example scene (KeyShot 7) and rendering.

Dries

Offline Adam_04

  • Newbie
  • *
  • Posts: 5
Re: Polished Finish
« Reply #2 on: November 08, 2017, 04:23:48 am »
Hi Dries,

Thanks for this! Ill give it ago and will let you know if I run into any problems

Thanks

Adam