Author Topic: Weld Seam creation  (Read 5675 times)

0 Members and 1 Guest are viewing this topic.

Offline JasonM1972

  • Newbie
  • *
  • Posts: 35
  • KeyShot 8 Pro
Re: Weld Seam creation
« Reply #15 on: November 08, 2017, 04:48:34 am »
Hello Jason.


Here we go. I took some minutes. All details can be found in the attached package.


Thank Will for the inspiration to the right direction. And I also thanks Esben (even if I didn't checked your file).


I changed the color a bit just to give more control. And I used my favorite environment.






Cheers
Marco

Marco

Thanks very much for this, its really appreciated (Thanks to Will and Espen also) and I wish I could buy you a beer.

Now, I'm currently looking at your settings and applying them to my version, I need to understand how you can get there and I cant. will keep you all posted

Kind Regards

Jason

Offline MWo

  • Hero Member
  • *****
  • Posts: 878
  • Senior Technical Consultant @ INNEO (Germany)
    • german KeyShot page from INNEO Solutions
Re: Weld Seam creation
« Reply #16 on: November 09, 2017, 10:35:05 am »
Hello Jason

I think it would be helpful if you look into the scale (X, Y direction) from the cylindrical mapping. As Esben mentioned this needs to be fit to the geometry. If I'm right it was about 0.001 in X and 1 in Y. The values can be different if you activate the DPI option with a value of 72 (what is defined in the texture file)

I like your idea of the beer. It would be a very interesting session with Will (located in the US), Esben (located in Denmark) and you and me (from Hamburg / Germany) - but this will not happen too soon?!


Maybe you'll post your final solution.


Kind Regards

Marco


Offline Esben Oxholm

  • KeyShot Beta
  • Hero Member
  • *****
  • Posts: 1670
  • esbenoxholm.dk/keyshot-video-course
    • Freelance CG Artist
Re: Weld Seam creation
« Reply #17 on: November 09, 2017, 11:07:30 am »
Thanks very much for this, its really appreciated (Thanks to Will and Espen also) and I wish I could buy you a beer.

I like your idea of the beer. It would be a very interesting session with Will (located in the US), Esben (located in Denmark) and you and me (from Hamburg / Germany) - but this will not happen too soon?!

No problem. I can be in Hamburg on a four hour notice. Just let me know when you put the beers in the fridge ;)

Offline Will Gibbons

  • Hero Member
  • *****
  • Posts: 2849
  • willgibbons.com
    • My Website
Re: Weld Seam creation
« Reply #18 on: November 17, 2017, 02:16:18 pm »

I like your idea of the beer. It would be a very interesting session with Will (located in the US), Esben (located in Denmark) and you and me (from Hamburg / Germany) - but this will not happen too soon?!

No problem. I can be in Hamburg on a four hour notice. Just let me know when you put the beers in the fridge ;)

I wanna see this happen 8)