Author Topic: How can i improve this scene?  (Read 2234 times)

0 Members and 1 Guest are viewing this topic.

Offline kerembyl

  • Newbie
  • *
  • Posts: 19
How can i improve this scene?
« on: July 15, 2017, 07:55:19 am »
Hello people!

Like two month ago i have designed my own reprap 3d printer in SolidWorks and recently i had decided to play with it by importing KeyShot. The results are shown below. But i am not satisfied with the result and i open to ideas about what can be done to improve it.

Thanks in advance.

Offline Will Gibbons

  • Hero Member
  • *****
  • Posts: 2849
  • willgibbons.com
    • My Website
Re: How can i improve this scene?
« Reply #1 on: July 17, 2017, 08:59:54 am »
I think these look quite nice actually. On the bottom image, it seems a bit dark/dull. Maybe an environment with greater dynamic range and some more highlights?

Offline LayC42

  • Sr. Member
  • ****
  • Posts: 358
  • mostly harmless
Re: How can i improve this scene?
« Reply #2 on: July 17, 2017, 11:10:48 am »
IMHO I would use some radii on the metal plates to catch some highlights. Small radius on the edges with different sizes should show more on the contour. And maybe bumps and light scratches will bring some life in this scene?!

But well played right now!