Author Topic: How to import Cable geometry from Pro/E  (Read 5168 times)

0 Members and 1 Guest are viewing this topic.

Offline aimer2512

  • Newbie
  • *
  • Posts: 8
How to import Cable geometry from Pro/E
« on: March 03, 2011, 01:41:58 am »
Has anybody an idea how to bring cable geometry from Pro/E into keyshot.
The cables were created in the Pro/E Cabling module.
I tried STEP, OBJ, IGES, PDF without any success.

Achim

Offline aimer2512

  • Newbie
  • *
  • Posts: 8
Re: How to import Cable geometry from Pro/E
« Reply #1 on: March 03, 2011, 06:00:32 am »
Hello

The solution is to export the geometry as STEP, only with surfaces and also check the button
"export cable-surfaces".

see picture