« previous next »
Pages: [1]   Go Down

Author Topic: cross fade from 2 objects  (Read 1661 times)

0 Members and 1 Guest are viewing this topic.

Offline designklitzsche

  • Newbie
  • *
  • Posts: 6
cross fade from 2 objects
« on: May 18, 2017, 12:29:36 am »
hi,
It is possible to produce a cross-fade from one part to the other.
I tried it by fade out one part from 100 to 0% in 2seconds. in the same time I fade in the other object from 0 to 100%.
It doesnt worked. there were many artefacts..
thanks
Logged

Offline LayC42

  • Sr. Member
  • ****
  • Posts: 358
  • mostly harmless
Re: cross fade from 2 objects
« Reply #1 on: May 18, 2017, 04:22:02 am »
The artefacts appears if both object uses the same space. Try to scale one part to 0.99 % or 1.01 %

Hope that helps
Cheers
Marco
Logged

Offline mattjgerard

  • Hero Member
  • *****
  • Posts: 1524
Re: cross fade from 2 objects
« Reply #2 on: May 18, 2017, 06:18:48 am »
^^^ That's the answer. I've tried this before as well, and this is the solution that worked. There might be other factors, if you can post some screenshots or a project file we can take a deeper look.
Logged

Offline designklitzsche

  • Newbie
  • *
  • Posts: 6
Re: cross fade from 2 objects
« Reply #3 on: May 29, 2017, 11:20:37 pm »
hi,
thanks for the hint. It works  :)
Logged
Pages: [1]   Go Up
« previous next »