Author Topic: material help: deep red powdercoat with silver metallic flakes.  (Read 2368 times)

0 Members and 1 Guest are viewing this topic.

Offline cadjockey

  • Jr. Member
  • **
  • Posts: 82
Hi

I'm having major headaches trying to recreate the attached material and wanted to see if anyone can either point me in the right direction or fancied a stab at creating it.  Its a deep red powdercoat with silver metallic flakes. 
I've tried the metallic paint options but can't emulate the look, and blows out too easily or just looks washed out or pink instead.
also tried using a standard paint with layered metallic flecks over the top as a label which was better but still lost some of the vibrancy.

anyone?

Thanks

Rich
« Last Edit: March 16, 2017, 04:41:23 am by cadjockey »

Offline jhiker

  • Hero Member
  • *****
  • Posts: 585
Re: material help: deep red powdercoat with silver metallic flakes.
« Reply #1 on: March 16, 2017, 08:32:38 am »
Hi,
Had a quick stab at it. It's not great but you might be able to tune it a bit...

Offline cadjockey

  • Jr. Member
  • **
  • Posts: 82
Re: material help: deep red powdercoat with silver metallic flakes.
« Reply #2 on: March 17, 2017, 02:27:59 am »
that's pretty good!  thanks very much for the effort, i'll give it a try now :)

Rich

Offline Will Gibbons

  • Hero Member
  • *****
  • Posts: 2849
  • willgibbons.com
    • My Website
Re: material help: deep red powdercoat with silver metallic flakes.
« Reply #3 on: March 17, 2017, 08:46:22 am »
I can't tell based on the material ball example if it's already in there, but may want to add a large, subtle noise bump.

Offline cadjockey

  • Jr. Member
  • **
  • Posts: 82
Re: material help: deep red powdercoat with silver metallic flakes.
« Reply #4 on: March 17, 2017, 10:31:07 am »
there wasn't one, but adding a procedural bump does really help!  thanks for reminding.

Rich

Offline MWo

  • Hero Member
  • *****
  • Posts: 834
  • Senior Technical Consultant @ INNEO (Germany)
    • german KeyShot page from INNEO Solutions
Re: material help: deep red powdercoat with silver metallic flakes.
« Reply #5 on: March 23, 2017, 02:39:14 am »
I've posted a similar solution in this thread
« Last Edit: March 23, 2017, 02:40:47 am by MWo »

Offline cadjockey

  • Jr. Member
  • **
  • Posts: 82
Re: material help: deep red powdercoat with silver metallic flakes.
« Reply #6 on: March 23, 2017, 08:54:16 am »
thanks , thats very helpful ! :)

rich