Author Topic: Label Problem  (Read 2111 times)

0 Members and 1 Guest are viewing this topic.

Offline quint_89

  • Newbie
  • *
  • Posts: 2
Label Problem
« on: November 23, 2016, 08:22:55 am »
I'm new to keyshot and have found it smooth sailing thus far. One odd thing is happening when i try to place labels on the model. There seems to be a round border to the label unless I shrink it down. This border changes depending on where I place the label. The attached images show what's happening, The only thing changing from image to image is either the scale of the label or the position.

The original model is from Solidworks. PNG image.

guest84672

  • Guest
Re: Label Problem
« Reply #1 on: November 23, 2016, 08:24:28 am »
If you are using normal projection then you will need to adjust the depth. Increase the depth value until the late is no longer cut off.

Offline quint_89

  • Newbie
  • *
  • Posts: 2
Re: Label Problem
« Reply #2 on: November 23, 2016, 08:29:14 am »
Awesome. Thanks