Author Topic: We need a proper milky plastic material!  (Read 31039 times)

0 Members and 1 Guest are viewing this topic.

Offline hiro

  • Newbie
  • *
  • Posts: 1
Re: We need a proper milky plastic material!
« Reply #15 on: May 20, 2011, 06:30:45 pm »
Use the realtime render mode for the final render output. That gives you much better results.

yea, play around with the "bloom" effects, they lights will diffuse more like in the cell phone picture above. Good luck

btw, the milkywhite.mtl looks amazing! Thanks ;)

Offline rkulshrestha

  • Full Member
  • ***
  • Posts: 154
Re: We need a proper milky plastic material!
« Reply #16 on: May 21, 2011, 11:25:21 am »
Hey even Apple had the same problem with the white iPhone.

Offline justindustrial

  • Newbie
  • *
  • Posts: 46
Re: We need a proper milky plastic material!
« Reply #17 on: May 23, 2011, 03:19:40 am »
Thanks Thomas, I left my computer for a while and when I came back the realtime render left me with some pretty impressive results. They are hard to see right away but with a little instinct getting the material settings in the right spot the realtime render eventually produces accurate translucent plastics.

Offline sric.id

  • Newbie
  • *
  • Posts: 1
Re: We need a proper milky plastic material!
« Reply #18 on: November 03, 2015, 01:18:12 pm »
Hi guys... here is my WIP (Work In Progress) recipe for milky plastic: