Author Topic: Help with this material  (Read 3642 times)

0 Members and 1 Guest are viewing this topic.

Offline rahulgs

  • Newbie
  • *
  • Posts: 6
Help with this material
« on: June 21, 2015, 12:35:26 am »
Hi,
Iam stucked with this material attached. I have tried several ones but the client is not satisfied. Can anyone help with this. The client needs the blemishes exactly like in the original picture.

Offline rahulgs

  • Newbie
  • *
  • Posts: 6
Re: Help with this material
« Reply #1 on: June 21, 2015, 08:31:39 am »
Anybody can you please help me how i can replicate the surface patterns or blemishes just like in the picture of this stainless steel?. It is very needy. I have tried several map and searched everywhere but no success.

Offline TpwUK

  • KeyShot Beta
  • Hero Member
  • *****
  • Posts: 2910
Re: Help with this material
« Reply #2 on: June 21, 2015, 08:55:40 am »
Which version of KeyShot are you using ? I would say version 5 can do this. Look at the Normals maps and use some scaling and you should get pretty close :)

Martin

Offline rahulgs

  • Newbie
  • *
  • Posts: 6
Re: Help with this material
« Reply #3 on: June 21, 2015, 09:41:13 am »
Which version of KeyShot are you using ? I would say version 5 can do this. Look at the Normals maps and use some scaling and you should get pretty close :)

Martin
Iam using keyshot 5

Offline TpwUK

  • KeyShot Beta
  • Hero Member
  • *****
  • Posts: 2910
Re: Help with this material
« Reply #4 on: June 21, 2015, 10:00:16 am »
Good - Have you looked on the KeyShot Cloud ?

Martin

Offline TpwUK

  • KeyShot Beta
  • Hero Member
  • *****
  • Posts: 2910
Re: Help with this material
« Reply #5 on: June 21, 2015, 10:59:44 am »
I have been looking closely at it and I think the bump map is something like a scan code or a bark material, so i am trying to play and see what i can do

Martin

Offline rahulgs

  • Newbie
  • *
  • Posts: 6
Re: Help with this material
« Reply #6 on: June 21, 2015, 01:20:31 pm »
Hi,
Yes i looked keyshot cloud but couldn't find suitable bump and also i don't know what to look for as this pattern is rare for steel. The model i need this to apply is attached(pic). If you find a solution then it will be very helpful.

Thanks

Offline Esben Oxholm

  • KeyShot Beta
  • Hero Member
  • *****
  • Posts: 1667
  • esbenoxholm.dk/keyshot-video-course
    • Freelance CG Artist
Re: Help with this material
« Reply #7 on: June 22, 2015, 01:45:12 pm »
Hi rahulgs.
I gave it a go. It is by all means not perfect, but it might help you anyways.
You can download the .ksp and check out the details here:
https://www.dropbox.com/s/m1k59bya6bv1ibs/Material.ksp?dl=0

Good luck with the project.
Best regards
Esben Oxholm

Offline Arn

  • Full Member
  • ***
  • Posts: 103
Re: Help with this material
« Reply #8 on: June 24, 2015, 10:05:05 am »
Great job! Very recognisable as printed steel.