KeyShot Forum

Contests => Previous Contests => 2012 Engine => Topic started by: Josh3D on July 12, 2012, 08:49:51 am

Title: Winner of the 2012 KeyShot Engine Rendering Contest
Post by: Josh3D on July 12, 2012, 08:49:51 am
We're posting it here first folks and will be following up with announcements via blog and newsletter. Another AMAZING contest and we are all thoroughly impressed with the submissions from both the KeyShot and GrabCAD community.



This was a very challenging contest to judge. There a a lot of great entries that meet the criteria of creativity, realism and composition. In the end, we had to narrow it down to one winner for best rendering, one for best animation and one for best student entry. Along with the 3D renderings and animations created, we also have a taste of some brilliant and very intricate engine models. Once again, we would like to congratulate everyone for an amazing job! Links to the forum post have been added so you can see all of the renderings submitted by the winners and congratulate them as well. Without further ado, I present, the winners of the KeyShot Engine Rendering contest!

Best rendering
Rodrigo Soria - Cirrus 22 Engine (forum post (http://keyshot.com/forum/index.php/topic,4193.0.html))

Best animation
Tim Purdy - 9 cylinder radial engine animation (forum post (http://grabcad.com/library/9-cylinder-radial-engine-animation))

Best student entry
Hailstone - Steam Engine animation (forum post (http://grabcad.com/library/keyshot-3d-rendering-competition-steam-engine))

Honorable mention
Tiho Ramovic - Ferrari Cutaway (http://keyshot.com/forum/index.php/topic,4087.15.html)

Tomas - Ducati 916 (http://keyshot.com/forum/index.php/topic,4102.0.html)

Steam boat Charlie - Twin Turbo LSX (http://keyshot.com/forum/index.php/topic,4188.0.html)

Bill Gould - Homage to James Watts (http://keyshot.com/forum/index.php/topic,4194.0.html)

Ali - Ducati 916 (http://grabcad.com/library/grabshot)

AA - KeyShot Engine (http://keyshot.com/forum/index.php/topic,4197.0.html)

Tris.d - 1 cylinder, 4 stroke Engine (http://keyshot.com/forum/index.php/topic,4205.0.html)

Vasileios Thalassinos - Jet Engine (http://grabcad.com/library/jet-engine-keyshot-rendering-competition-2)

Neelu Ravi - Ferrari Engine (http://grabcad.com/library/keyshot-3d-rendering-competition-ferrari-engine)

Andrew Guscott - Rusty Engine (http://grabcad.com/library/rusty-engine-for-keyshot-challenge)

Tim Feher - Rusty Engine (http://keyshot.com/forum/index.php/topic,4183.0.html)

Manolis Theofilos - Boxer Engine (http://grabcad.com/library/rendering-for-keyshot-challenge-3)





Best rendering
Rodrigo Soria - Cirrus 22 Engine (forum post (http://keyshot.com/forum/index.php/topic,4193.0.html))

(http://blog.keyshot.com/wp-content/uploads/2012/07/rodrigo-soria-cirrus22-650x297.jpg)


Best animation
Tim Purdy - 9 cylinder radial engine animation (forum post (http://grabcad.com/library/9-cylinder-radial-engine-animation))
Model: Jan Elg (http://grabcad.com/library/9-cylinder-radial-engine--12)


Best student entry
Hailstone - Steam Engine animation (forum post (http://grabcad.com/library/keyshot-3d-rendering-competition-steam-engine))
(http://blog.keyshot.com/wp-content/uploads/2012/07/hailstone-steamengine-650x359.jpg)


Honorable mention
Tiho Ramovic - Ferrari Cutaway (http://keyshot.com/forum/index.php/topic,4087.15.html)
Model: Tiho Ramovic
(http://blog.keyshot.com/wp-content/uploads/2012/07/tiho-ramovic-ferrari-cutaway-650x541.png)

Tomas - Ducati 916 (http://keyshot.com/forum/index.php/topic,4102.0.html)
Model: Mari (http://grabcad.com/mari)
(http://blog.keyshot.com/wp-content/uploads/2012/07/tomas-ducati-916-650x450.jpg)

Steam boat Charlie - Twin Turbo LSX (http://keyshot.com/forum/index.php/topic,4188.0.html)
Model: Steam boat Charlie
(http://blog.keyshot.com/wp-content/uploads/2012/07/charlie-twin-turbo-lsx2-650x317.jpg)

Bill Gould - Homage to James Watts (http://keyshot.com/forum/index.php/topic,4194.0.html)
Model: Bill Gould
(http://blog.keyshot.com/wp-content/uploads/2012/07/bill-gould-james-watts2-650x317.jpg)

Ali - Ducati 916 (http://grabcad.com/library/grabshot)
Model: Mari (http://grabcad.com/mari)
(http://blog.keyshot.com/wp-content/uploads/2012/07/ali-ducati-engine-650x361.jpg)

AA - KeyShot Engine (http://keyshot.com/forum/index.php/topic,4197.0.html)
Model: Nicolas (http://grabcad.com/library/v8-gm-350-turbo)
(http://blog.keyshot.com/wp-content/uploads/2012/07/AA-keyshot-engine-650x767.jpg)

Tris.d - 1 cylinder, 4 stroke Engine (http://keyshot.com/forum/index.php/topic,4205.0.html)
Model: Wiktor Kocula (http://grabcad.com/library/1-cylinder-4-stroke-engine-briggs-stratton)
(http://blog.keyshot.com/wp-content/uploads/2012/07/tris-keyshot-engine-650x317.jpg)

Vasileios Thalassinos - Jet Engine (http://grabcad.com/library/jet-engine-keyshot-rendering-competition-2)
Model: Vasileios Thalassinos (http://grabcad.com/library/jet-engine--2)
(http://blog.keyshot.com/wp-content/uploads/2012/07/Vasileios-jet-engine-650x320.jpg)

Neelu Ravi - Ferrari Engine (http://grabcad.com/library/keyshot-3d-rendering-competition-ferrari-engine)
Model: Vasileios Thalassinos (http://grabcad.com/library/ferrari-v12-5-7-lt-engine)
(http://blog.keyshot.com/wp-content/uploads/2012/07/neelu-ferrari-engine-650x297.jpg)

Andrew Guscott - Rusty Engine (http://grabcad.com/library/rusty-engine-for-keyshot-challenge)
Model: Stan Wile (http://grabcad.com/library/boxer-engine)
(http://blog.keyshot.com/wp-content/uploads/2012/07/andrew-guscott-rusty-engine-650x487.jpg)

Tim Feher - Rusty Engine (http://keyshot.com/forum/index.php/topic,4183.0.html)
Model: Tom Kirkup (http://grabcad.com/library/two-stroke-engine-complete-with-internals-100-solidworks)
(http://blog.keyshot.com/wp-content/uploads/2012/07/tim-feher-2-stroke-final-650x428.jpg)

Manolis Theofilos - Boxer Engine (http://grabcad.com/library/rendering-for-keyshot-challenge-3)
Model: Stan Wile (http://grabcad.com/library/boxer-engine)
(http://blog.keyshot.com/wp-content/uploads/2012/07/manolis-boxer-engine-650x317.jpg)

You can see all the entries on the KeyShot board (http://pinterest.com/keyshot/2012-engine-rendering-challenge/) and in the GrabCAD Challenge (http://grabcad.com/challenges/keyshot-3d-rendering-competition). Thanks again to everyone who participated and stay tuned for more contests in the future!
Title: Re: Winner of the 2012 KeyShot Engine Rendering Contest
Post by: Seghier on July 12, 2012, 11:24:50 am
Congratulations to all the winners :)
Title: Re: Winner of the 2012 KeyShot Engine Rendering Contest
Post by: gionir on July 12, 2012, 05:37:25 pm
Congratulations to the winners,
Some really good renders out there!
Title: Re: Winner of the 2012 KeyShot Engine Rendering Contest
Post by: Redsteel on July 12, 2012, 06:24:39 pm
Congratz to all the winners
Title: Re: Winner of the 2012 KeyShot Engine Rendering Contest
Post by: Kruno Knezic on July 13, 2012, 12:19:22 am
Gratz to Rodrigo and Tim for wining  licence, now we expect more images from you guys  ;)

and gratz to all other winners, good job  :D
Title: Re: Winner of the 2012 KeyShot Engine Rendering Contest
Post by: fario on July 13, 2012, 03:04:34 am
bravo! the level is excellent!
Antoine
Title: Re: Winner of the 2012 KeyShot Engine Rendering Contest
Post by: RODRIGO SORIA on July 13, 2012, 04:34:55 am
Thanks Guys,.. Thanks Team Keyshot.  : ;)
Title: Re: Winner of the 2012 KeyShot Engine Rendering Contest
Post by: guest493 on July 14, 2012, 07:06:46 pm
Thanks guys for the Honorable Mention!!  I really had a lot of fun with the demo of the new version. 

Congrats Rodrigo!  All your renders were amazing! 
Title: Re: Winner of the 2012 KeyShot Engine Rendering Contest
Post by: Dylan on July 18, 2012, 02:06:04 pm
Congratulations to all the winners. All the work is of a very high standard.