KeyShot Forum

Gallery => Amazing Shots => Topic started by: nachoriesco on May 15, 2019, 07:11:15 am

Title: Dragon
Post by: nachoriesco on May 15, 2019, 07:11:15 am
Hi all! This is an sculpt I wanted to make some time ago, it’s based on an old unfinished pencil sketch and now has been converted it into a 3D model, hope you like it.
On the following link you can watch more images: https://www.artstation.com/artwork/W2rW22

(https://i.postimg.cc/9MZ7ms4W/Dragon-KSR2.jpg)

(https://i.postimg.cc/FFn4F14H/Dragon-KSR2-mini.jpg)

(https://i.postimg.cc/DykK4H89/Dragon-CU2.jpg)

(https://i.postimg.cc/NF8CHNnt/Dragon-CU3.jpg)

(https://i.postimg.cc/sfJJ5ZX3/Dragon-CU4.jpg)

(https://i.postimg.cc/76ZZccgs/metal-dragon.jpg)
Title: Re: Dragon
Post by: abeer on May 15, 2019, 02:55:36 pm
I dig his expression :D Nice sculpt.
Title: Re: Dragon
Post by: DMerz III on May 15, 2019, 05:57:16 pm
Very cool! I like the sculpt and especially like the final beauty shot
Title: Re: Dragon
Post by: nachoriesco on May 17, 2019, 12:41:58 pm
DMerz III, thank you!  ;)
Here goes another shot

(https://i.postimg.cc/ZqW1HqZR/Dragon-KSR3.jpg)
Title: Re: Dragon
Post by: Eric Summers on May 17, 2019, 01:03:30 pm
Oh man, that's pretty sweet! I definitely liked the others, but the material on this one is amazing! The level of detail is impressive. :)
Title: Re: Dragon
Post by: Will Gibbons on May 17, 2019, 01:23:15 pm
Wow! This is beautiful! And that translucent material is great! I love it.
Title: Re: Dragon
Post by: nachoriesco on May 18, 2019, 12:13:53 pm
Thank you guys!  :D ;) Yes translucency always gives an special touch
Title: Re: Dragon
Post by: Jet3D on May 24, 2019, 07:12:39 am
This is a fantastic piece of art. Love it.
When you are ready I can print it for you on our dental /  jewellery printers if you wish?
MJP 2500 - as a gift....

Regards, Jet
Title: Re: Dragon
Post by: nachoriesco on May 24, 2019, 07:43:30 am
Tanks Jet3d, do you think that it'd be the right model for that printer? do you mean in wax?
Title: Re: Dragon
Post by: Jet3D on May 24, 2019, 10:40:10 am
Hi mate,

The printer can print the most amazing detail and uses wax as support that melts away leaving the print.
The printer is a pro one that is around 60 k.

The advantage is the is no surface finishing / sanding and parts like your feathers / scales will all come out.
You can also have spaces like up under helmets etc. The wax provides 100% support so there is no warping of the print and accuracy is brilliant.

Examples I printed below.

Regards, Jet
Title: Re: Dragon
Post by: nachoriesco on May 24, 2019, 10:59:14 am
 I know that machine perfectly, I've printed several designs with it, but all of them about jewelry products so , they were printed on wax ( blue one). But yours is the one which prints with resin ,right? I know that uses wax for supports.

If so, I would love to print it out!
Title: Re: Dragon
Post by: Jet3D on May 24, 2019, 11:04:46 am
I run the 3D department of Gentle Giant at Pinewood Studios in the UK.
Yes, ours are all of the resin ones - they are the same except for the software.
I have used the MJP 2500W for casting a hand and half sword hilt..... superb.

I am happy to print this for you and freight if you wish, when you are ready.
Would be my pleasure mate.

Jet
Title: Re: Dragon
Post by: nachoriesco on May 24, 2019, 11:13:18 am
Sure! Count on it! I've been thinking many times to contact with your company ,to apply as digital sculptor!  ;D

Could you give an email where we can arrange all details?

And thanks a lot for your offering!
Title: Re: Dragon
Post by: Jet3D on May 24, 2019, 11:16:26 am
Sure mate.
My personal email is [email protected]

Anytime - you are a great artist
Title: Re: Dragon
Post by: Will Gibbons on May 28, 2019, 11:49:22 am
Would be cool to see the rendering next to a final print!
Title: Re: Dragon
Post by: Jet3D on May 28, 2019, 12:15:31 pm
As soon as Marvel stop hogging the machines, I will pop this on and upload pics.

Regards, Jet
Title: Re: Dragon
Post by: nachoriesco on June 08, 2019, 03:08:33 am
Hi all! Here goes some pictures of the printing process, masterfully made by Jet3d. I love how it came out!

(https://i.postimg.cc/NG9f3tpF/Whats-App-Image-2019-06-07-at-12-51-26.jpg)

(https://i.postimg.cc/wvMns67m/Whats-App-Image-2019-06-07-at-12-51-26-1.jpg)

(https://i.postimg.cc/7YSPLVvy/Whats-App-Image-2019-06-07-at-15-39-00.jpg)

(https://i.postimg.cc/XY3jBC3B/Whats-App-Image-2019-06-07-at-15-39-00-1.jpg)

(https://i.postimg.cc/8k2PDY0H/Whats-App-Image-2019-06-07-at-17-58-30.jpg)

(https://i.postimg.cc/9fQcJHDW/Whats-App-Image-2019-06-07-at-17-58-30-1.jpg)

(https://i.postimg.cc/fRKwcRT2/Whats-App-Image-2019-06-07-at-17-58-31.jpg)
Title: Re: Dragon
Post by: Jet3D on June 12, 2019, 04:18:08 am
On its way.....
Title: Re: Dragon
Post by: Eric Summers on June 12, 2019, 06:38:05 am
That's pretty sweet looking! Jet, out of curiosity, what is the block at the far end of the build plate? Is it a purge part?
Title: Re: Dragon
Post by: Jet3D on June 12, 2019, 06:58:50 am
Hi Eric  8 )

This is a registration wall which is used to check fails and clogged heads that may be concealed by the print.

The machines are the MJP 2500 PLUS by 3Dsystems.
Title: Re: Dragon
Post by: Eric Summers on June 12, 2019, 09:03:30 am
Hi Eric  8 )

This is a registration wall which is used to check fails and clogged heads that may be concealed by the print.

The machines are the MJP 2500 PLUS by 3Dsystems.

Very cool! Thanks for the info; ProJets are pretty great.