KeyShot Forum

Share => Materials and Textures => Topic started by: monsieurlacombe on December 03, 2018, 03:39:46 pm

Title: "milky foil"
Post by: monsieurlacombe on December 03, 2018, 03:39:46 pm
Hey,
Is there a way to create such a "milky foil" as shown in the attached picture? Im grateful for your help.
Greetings.
Title: Re: "milky foil"
Post by: bdesign on December 03, 2018, 04:10:14 pm
I'd recommend using the Plastic (Cloudy) material type, and make sure your sheet has some actual thickness (volume).

Cheers,
Eric
Title: Re: "milky foil"
Post by: MWo on December 05, 2018, 09:36:17 am
I would start with the advanced material, black as diffuse and light grey in the transmission channels with a small roughness value on top and a high roughness in the transmission.


That should work fine and way faster then cloudy plastic (sorry Eric).


May share your test results and scene?!


Hope that helps


Cheers
Marco