KeyShot Forum

Technical discussions => Materials => Topic started by: JoshMcCann on April 10, 2018, 07:09:17 am

Title: Dull Looking Aluminum Tubing
Post by: JoshMcCann on April 10, 2018, 07:09:17 am
I'm trying to replicate the look of aluminum tubing and I'm having quite a difficult time pulling it off.  I can get some pretty good results using substance painter, but then I have to UV the model and I have a lot of different renders to do and that will just take too much time.  I have attached an image below. Would love to hear any suggestions anyone might have.

Title: Re: Dull Looking Aluminum Tubing
Post by: DMerz III on April 11, 2018, 11:46:12 am
Can you also post a screenshot of where you are, it's hard to see how far off you are and give suggestions if we don't see what you see.

Without being able to see what you've tried, have you used any labels /roughness maps to get variations in the material?
Title: Re: Dull Looking Aluminum Tubing
Post by: JoshMcCann on April 12, 2018, 04:37:55 pm
Sorry, that would have been helpful. Here's what I've got so far.

Title: Re: Dull Looking Aluminum Tubing
Post by: Esben Oxholm on April 13, 2018, 03:14:14 am
Looks good - Adding some kind of dirt texture to the roughness of the metal and adjusting it using a color to number node should get you close.