KeyShot Forum

Technical discussions => Materials => Topic started by: Philrider7 on June 16, 2011, 10:05:32 am

Title: Depth of labels
Post by: Philrider7 on June 16, 2011, 10:05:32 am
I am showing you part of a project that has glass with a silkscreen on it. I got the glass with a thickness (solid and in the option, I checked 2 sides and I put the silkscreen as a label in png. I tried to project it with normal projection, but it wasnt doing it and after that I went it planar z and its showing the labels on the other sides of the glass too!

I understannd than depth controls the surfaces that sees this labels, but depth is gray out on planar z!

Is there something i didnt follow correctly or any better solution?

Thanks

Phil
Title: Re: Depth of labels
Post by: guest84672 on June 16, 2011, 11:32:24 am
What do you mean by "normal didn't do it"? Click on position and move the label into place once you applied it.

Thomas