KeyShot Forum

Technical discussions => Materials => Topic started by: constellation23 on April 03, 2017, 07:50:10 pm

Title: Materials overlapping/acting strangely
Post by: constellation23 on April 03, 2017, 07:50:10 pm
I've imported this assembly from Solidworks with the surfaces colored in. The casters on the right are what they look like in Solidworks, but some of them aren't keeping their color properly (casters on the right). The same thing is happening to the wood texture on the panels.
Any tips or suggestions?

Thank you!
Title: Re: Materials overlapping/acting strangely
Post by: LayC42 on April 03, 2017, 09:21:29 pm
Did you checked the scene tree if the parts are duplicated?
Title: Re: Materials overlapping/acting strangely
Post by: Will Gibbons on April 04, 2017, 06:42:43 am
LayC42 is dead-on. That's called z-fighting and happens when there are co-planar surfaces. You likely have 2 or more sets of wheels in the exact same place.
Title: Re: Materials overlapping/acting strangely
Post by: constellation23 on April 04, 2017, 09:13:13 am
Thank you! I found and deleted the duplicates, and it works now